Available Replaceable Wearing Polyurethane Pump Spart Parts for Centrifugal Pumps
Specifications and Advantages of Polyurethane Urethane PU Slurry Pump Wear Parts:
LongTeng Polyurethane Urethane PU Slurry Pump Spare Parts Using the very latest PU casting technology, we can produce high-quality casting parts. By varying the raw materials, formulations and methods of manufacture, we can influence the properties to meet specific requirements.
We are able to manufacture complex geometries, also with larger components, and all with the outstanding properties of a polyurethane.
Casting technology allows us to use simple moulds to produce small and large batches inexpensively. They can also be permanently bonded to other materials (steel, aluminium, cast iron, etc.).
Our highly trained applications engineers can provide you with optimum, individual advice on your product.
We can cast parts with weights of up to 500 kg. All materials can be adapted to suit their respective applications. We can influence the hydrolosis resistance, microbe resistance, colour and hardness. The materials can also be made electrically conductive. For careful handling during assembly operations in the automotive industry, we have the option of providing a material that leaves absolutely no residue on surfaces which might impair the paint finish.
We can offer all grades, from 5° Shore A to 95° Shore A, even up to 80° Shore D. We can process hot- and cold-casting polyurethanes. And our 80° Shore D material can even be used to replace steel parts.
Features:
1.Slurry pump Polyurethane Liners wear resistance is excellent, the wear resistance of polyurethane slurry pump sets is generally rubber slurry pump parts and metal slurry pump more than 3-5 times, polyurethane slurry pump parts is more longer life, and thus replace the low frequency, high efficiency.
2.Slurry pump polyurethane liners with excellent hydrolysis resistance, oil, acid and alkali, corrosion resistance. It can be used in any mineral processing, transportation environment.
3.Slurry pump polyurethane liners sets of special production process makes the polyurethane is directly cast with a steel skeleton, polyurethane adhesive layer and steel skeleton bonding firmly, not degumming, continuous layer.
4.Slurry pump polyurethane liners surface is smooth, no burr, non-stick material, low coefficient of friction, the material running resistance is small, high transport efficiency.
5.Slurry pump polyurethane liners with excellent rebound performance, impact resistance, can effectively reduce the impact of the transport medium on the pump.
6.Slurry pump polyurethane liners sets the use of no noise, can greatly improve the working environment.
7.Can be installed in multistage series
8.Easy to maintenance
Product Materials:
| Basic Part No. |
Material Code |
Part Name |
| 001 |
E62 |
Adjusting Screw |
| 003 |
G01 |
Base |
| 005 |
|
Bearing Assembly |
| 011 |
E62 |
Clamp Washer |
| 013 |
D20 |
Cover Plate |
| 015 |
E62 |
Cover Plate Bolt |
| 017 |
R26A |
Cover Plate Liner |
| 018 |
R26A |
Cover Plate Liner (Half) |
| 024 |
E62 |
End Cover |
| 028 |
G01 & A05 |
Expeller |
| 029 |
G01 & A05 |
Expeller Ring |
| 029R |
R08A |
Expeller Ring (Rubber) |
| 032 |
D20 |
Frame Plate |
| 034 |
E62 |
Frame Plate Bolt |
| 036 |
R26A |
Frame Plate Liner |
| 039 |
E63 |
Frame Plate Stud |
| 041 |
A05A,R26A |
Frame Plate Liner Insert |
| 043 |
R26A |
Frame Plate Liner (Half) |
| 044 |
K24 |
Gland Assembly |
| 060 |
R08A |
Intake Joint |
| 062 |
D70 |
Labyrinth |
| 063 |
K31 |
Lantern Ring |
| 064 |
S18 |
Impeller O-Ring |
| 067 |
E62 |
Neck Ring |
| 070 |
E05 |
Shaft Key |
| 073 |
E05 |
Shaft |
| 075 |
D20 |
Shaft Sleeve |
| 076 |
D20 |
Shaft Sleeve (Long) |
| 078 |
G01 |
Stuffing Box |
| 081 |
E02 |
Keeper Plate |
| 083 |
A05A,R26A |
Throat Bush |
| 085 |
E02 |
Cotter |
| 090 |
S10 |
Lip Seal |
| 109 |
S18 |
Shaft O-Ring |
| 110 |
A05A |
Volute Liner |
| 111 |
Q05 |
Packing |
| 117 |
E62 |
Shaft Spacer |
| 118 |
K31 |
Lantern Restrictor |
| 118-1 |
K24 |
Lantern Restrictor(Low Flow) |
| 122 |
R11A |
Expeller Ring/Stuffing Box Seal |
| 124 |
R08A |
Volute Liner Seal |
| 125 |
R08A |
Volute Frame Seal |
| 132 |
R08A |
Discharge Joint Ring |
| 138 |
E62 |
Grease Cup Adaptor |
| 179 |
C23 |
Shaft Sleeve Spacer |
| 210 |
S46 |
Shaft O-Ring |
| 217 |
S18 |
Impeller O-Ring |
| 239 |
C23 |
Impeller Release Collar |
| 241 |
K24 |
Lip Seal Gland |
| 302 |
E02 |
Lifting Tube |
| 303 |
E02 |
Locating Nut |
| 304 |
E02 |
Volute Lifting Beam |
| 306 |
E02 |
Shaft Wrench |
| 310 |
E02 |
Stuffing Box / Expeller Ring |
| 425 |
R08A |
Dyna Seal |
| 430 |
U14 |
Nut Covers |
| 005 |
|
Bearing Assembly |
| 019 |
E02 |
Mounting Plate |
| 041 |
A05A |
Back Liner |
| 064 |
S18 |
Impeller O-Ring |
| 070 |
E05 |
Shaft Key |
| 092 |
A05A |
Casing |
| 102 |
E02 |
Column |
| 116-1 |
R10A |
Strainer - Upper (Rubber) |
| 116-2 |
G01 |
Strainer-Upper (Cast Iron) |
| 116-3 |
U02A |
Strainer-Upper(Urethane) |
| 116-4 |
C23 |
Strainer-Upper(SS Mesh) |
| 116L |
U01A |
Strainer-Lower |
| 125 |
R08A |
Back Liner Seal |
| 154 |
E02 |
Discharge Pipe |
| 204 |
R00 |
Discharge Pipe Gasket |
| 231 |
E02 |
Suction Pipe |
| 290 |
E02 |
Spacer |
| 293 |
E02 |
Discharge Pipe Support |
| 306 |
E02 |
Shaft Wrench |
| 430 |
U04A |
Nut Covers |
| 005 |
HT |
Bearing Assembly |
| 019 |
Metal |
Mounting Plate |
| 041 |
High Chrome or Elastomer |
Back Liner |
| 064 |
S10 |
Impeller O Ring |
| 070 |
|
Shaft Key |
| 092 |
G01 D20 |
Casing |
| 102 |
G01 |
Column |
| 116 |
G01 |
Strainer-Upper |
| 116L |
G01 |
Strainer-Lower |
| 153 |
G01 |
Column Clamp |
Product Photos:
Slurry Pump Main parts:
• Impeller - front and rear shrouds have pump out vanes that reduce recirculation and seal contamination.
Hard metal and molded rubber impellers are complete interchangeable. Cast in impeller threads require no inserts or nuts. High efficiency and high head designs are also available.
• Liners - Easily replaceable liners are bolted, not glued, to the casing for positive attachment and ease of maintenance. Hard metal liners are completely interchangeable with pressure molded elastomer. Elastomer
seal rings back all liner joints.
• Throat Bush - Wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal.
• Bearing assembly - A large diameter shaft with short overhang minimizes deflection and contributes to long bearing life. Only four through bolts are required to hold the cartridge type housing in the frame.
The properties of the rubber material:
We have variety of natural rubber and elastomer, which can be used for pumping corrosive or acid slurry. But the rubber material is not suitable for slurry which contain sharp solids.
When the slurries contain fine particles, the rubber material features good performance of wear resistant.
Materials for Wet End Parts:
High chrome alloy :A05, A07, A49, etc.
Natural rubber:R08, R26, R33, R55, etc.
Polyurethane
Ceramic
Other material as per requests, like stainless steel, duplex stainless steel, Nickle alloy, Alloy 20, etc.
Perennial large inventory of Spare Parts Are:
1. Impellers(Open, Semi-open,Closed Impellers)
2. Volute
3.Throat Bush
4.Staffing Box
5. Expeller& Expeller Ring
6.Cover Plate & Frame Plate
7.Base
8.Bearing Hosing
9.Shafts
10.All Studs & Bolts
About Shijiazhuang LongTeng
We Shijiazhuang Longteng is a factory of slurry pump and spare parts with our own casting workshop,with more than 20 years of casting experience. We have complete production lines for various pump types and can control product quality from the source,because we never use recycling material. All products must undergo 4 to 5 times inspections from production to delivery, such as material inspection before and after casting, hardness inspection, several times dimension Detection, impeller balance inspection(Including static balance and dynamic balance), pressure inspection before the pump leaves our factory, etc. Multiple testing ensures that each product must be qualified before delivery.
In addition to product quality, we also attach great importance to service and believe that only good quality and service can ensure a happy and long-term cooperative relationship. As a real factory, we can provide you with one-stop service from production to after-sales, so that you have no worries during cooperating with us.
Our technical service
Provide users with important technical information for operation and maintenance. Combining with the network and remotely, provide technical and business training for equipment installation, commissioning, operation, and maintenance. When necessary, experienced engineering and technical personnel could be sent to provide on-site technical services in time . After receiving the user's complain of the quality problem. It is guaranteed to reply within 24 hours and provide a solution within 48 hours, and the service will not stop if the user is not satisfied with the solution.
Our Professional Attentive Service.
1. Perfect Quality Control-- We own professional quality management and process inspection team
2. Fast High Quality Service--In the process of service,the demands of all customers can be solved quickly and effectively.
3. Supply Support Capacity--We ensures the products with good quality,sufficiently quantity and diversification.
4. Excellent Cost Performance--Provide the most excellent products,the most favorable price and the most perfect service to all customers.
We are 365days x 24 hours reday for you!
Line of production:
We Shijiazhuang Longteng is a factory of slurry pump and spare parts with our own casting workshop,with more than 20 years of casting experience. We have complete production lines for various pump types and can control product quality from the source,because we never use recycling material. All products must undergo 4 to 5 times inspections from production to delivery, such as material inspection before and after casting, hardness inspection, several times dimension Detection, impeller balance inspection(Including static balance and dynamic balance), pressure inspection before the pump leaves our factory, etc. Multiple testing ensures that each product must be qualified before delivery.
Our Stock products:
We have sufficient inventory of products throughout the year to ensure that we can issue products in the shortest time, to ensure that our customers in any urgent need of product replenishment can receive products quickly, and better serve the end customers!
We don't tie our clients into expensive service contracts.
We believe in working with our clients as and when they require our services.
We make it very clear what you do and do not need to spend money on and ensure that you get the maximum return out of your investment in your pumps.
We offer a 1 Year Warranty on our Slurry pumps which is unique in the industry.
We are committed to being the easiest company in the industry to deal with as well as the friendliest
When you work with us, you can count on personalized, one-on-one service every step of the way. We earn your trust by being responsive, intuitive and honest. We earn your respect by delivering on time and on budget. We built our reputation on exceptional customer service.
Standard export plywood wooden box lined with plastic film and bubble film to better protect the product from any intact until arrival at the customer's warehouse.No matter where you are located, we can get the products you need to your hands by land, ship and air
Certificates:
Q1: What kind of company you are?
A: Shijiazhuang LongTeng Machinery Co.,Ltd is professional manufacturer in pumps. After accumulation and development of 25 years, we have formed a complete system of pump design, selection, application, manufacture, marketing and maintenance. We have passed CE,ISO, SGS certificate. Our customers are at
home and abroad. Hope to coorperate with the worldwide friends.
Q2: What is your product range?
A:Centrifugal pump includes slurry pump, gravel pump, clean water pump, sewage pump, chemical pump, self-priming pump and diesel engine pump.
Q3: What's your MOQ ?
A:Both for slurry pump or spare parts is 1.
Q4: What are your payment terms?
A: T/T, L/C, D/P, D/A or as customer required
Q5: How about the warranty?
A: One year warranty for pumps. Spare parts depends on other pump working condition details.
Q6: What is the delivery time?
A: 7-30 days according to customer quantities.
Q7: Can you do OEM brand?
A:Yes,with our own Foundry,OEM service is our big advantage,just show your detailed drawing,different materials is available.
Audited Supplier 
){kind=link}