Power Plant Deslagging Solids Transfer Mining Slurry Pump

• Customization: Available
• After-sales Service: We Can Provide Technical Support at Any Time.
• Warranty: 1years for Pump
• Model NO.: From 1.5/1B-18/16TU
• Max.Head: 110m-150m
• Max.Capacity: >400 L/min
• Driving Type: Both Electric Motors and Diesel Engines
• Impeller Number: Single-Stage Pump
• Working Pressure: Low Pressure Pump
• Influent Type of Impeller: Single Suction Pump
• Position of Pump Shaft: Horizontal Pump
• Pump Casing Combined: Horizontal Split Pumps
• Mounting Height: Both Since Irrigation &Suction Centrifugal
• Impeller: Open, Semi-Open, Closed
• Usage: Pump, Pumps, Slurry Pump
• Product Name: Ore Transportation Tailings Treatment Power Plant
• Color: as Your Request
• Application: Handling Abrasive or Corrosive in Many Industries
• Theory: Centrifugal Pump
• Power: Motor or Diesel Engine
• Material: Metal Lined or Elastomer Lined
• Lubrication: Grease and Oil
• Seal Form: Packing Seal, Expeller Seal or Mechanical Seal
• Structure: Double Casing
• OEM Service: Our Big Advantage
• Transport Package: Standard Export Plywood Cases with Inner Plastic
• Specification: Plywood
• Trademark: LongTeng
• Origin: China
• HS Code: 841370
• Production Capacity: 10000 Sets/Year

Product Description

Slurry Pump Introduction

Power Plant Deslagging Solids Transfer Mining Slurry Pump

LongTeng Slurry pumps are centrifugal pumps, they are designed for pumping highly abrasive and high density slurry. 
These slurries are thick, viscous fluids that contain particles, which are hard to pump with traditional process chemical or water pumps.Under this situation, our heavy-duty slurry pump is used to do the work.
LongTeng Slurry Pumps are widely used in various industrial sites,such as mining,mineral,metallurgy processing, dredging,
de-watering, water treatment, coal washing, mill, cyclone feed, tailing, power, building material etc.
Mud pump, sand pump, dredge pump, sludge pump, impurity pump and desilting pump are all belong to category of slurry pump.
SHseries pumps are called different names for different working duties: Mineral processing pump, Mill discharge slurry Pump,
Booster pump, Feeding pump, Tailing pump,Transfer pump, Thickner Underflow Pump, Dewatering screen pump, Pressure pump...

Slurry Pump Features:
1.Replaceable wear-resistant metal or rubber liners and impellers, long service life time. 
2. Easily maintenance,casing and each wear parts can be removed completely when maintaining. 
3. Bearing assembly use grease lubrication. 
4. Seal types: Packing seal, Expeller seal and Mechanical seal. 
5. Discharge direction can be installed at intervals of 45 degrees as request and oriented to any eight positions to suit applications.
6. Drived by:V belt drive, gear reducer drive, fluid coupling drive, and frequency conversion drive devices. 
7.Drvien type:DC,CR,CV, CLZ,ZV, ZVZ...
8. Application Widely, better NPSH and high efficiency.SH series pump can be installed in multistage to meet more requirements.

Slurry Pump Parameter Table

Pump Model	Allowable Max. Power(KW)	Clear Water Performance
		Capacity  Q		Head H(m)	Speed n(r/min)	Max.Eff. η%	NPSH (m)	Impeller  Dia.
		m3/h	l/s
1.5/1 B-SH	15	12.6-28.8	3.5-8	6-68	1200-3800	40	2-4	152
1.5/1B-SHR	15	10.8-25.2	3-7	7-52	1400-3400	35	2-4	152
1.5/1C-HH	30	16.2-34.2	4.5-9.5	25-92	1400-2200	20	2-5.5	330
2/1.5-SH	15	32.4-72	9-20	6-58	1200-3200	45	3.5-8	184
2/1.5-SHR	15	25.2-54	7-15	5.5-41	1000-2600	50	2.5-5	178
3/2C-SH	30	39.6-86.4	11-24	12-64	1300-2700	55	4-6	214
3/2C-SHR	30	36-75.6	10-21	13-39	1300-2100	55	2-4	213
3/2D-HH	60	68.4-136.8	19-38	25-87	850-1400	47	3-7.5	457
4/3C-SH	30	86.4-198	24-55	9-52	1000-2200	71	4-6	245
4/3D-SH	60	86.4-198	24-55	9-52	1000-2200	71	4-6	245
4/3C-SHR	30	79.2-180	22-50	5-34.5	800-1800	59	3-5	245
4/3D-SHR	60	79.2-180	22-50	5-34.5	800-1800	59	3-5	245
6/4D-SH	60	162-360	45-100	12-56	800-1550	65	5-8	365
6/4E-SH	120	162-360	45-100	12-56	800-1550	65	5-8	365
6/4D-SHR	60	144-324	40-90	12-45	800-1350	65	3-5	365
6/4E-SHR	120	144-324	40-90	12-45	800-1350	65	3-5	365
6/4F-SHH	260	324-720	90-200	30-118	600-1000	64	3-8	711
8/6E-SH	120	360-828	100-230	10-61	500-1140	72	2-9	510
8/6S-SH	300	360-828	100-230	10-61	500-1140	72	2-9	510
8/6E-SHR	120	324-720	90-200	7-49	400-1000	65	5-10	510
8/6R-SH	300	324-720	90-200	7-49	400-1000	65	5-10	510
8/6S-HH	560	468-1008	130-280	20-94	500-1000	65	4-12	711
10/8ST-SH	560	612-1368	170-380	11-61	400-850	71	4-10	686
10/8ST-SHR	560	540-1188	200-450	7-45	300-650	80	2.5-7.5	686
10/8E-M	120	540-1440	150-400	14-60	600-1000	73	4-10	549
12/10HS-ST	560	936-1980	260-550	7-68	300-800	82	6	762
12/10 ST-SH	560	720-1620	320-700	13-14	300-500	79	3-8	762
14/12ST-SH	560	1260-2772	350-770	13-63	300-600	77	3-10	965
14/12ST-SHR	560	1152-2520	380-850	11-63	250-550	79	4-10	965
16/14ST-SH	1200	1368-3060	380-850	11-63	250-550	79	4-10	1067
18/16TU-SH	1200	2160-5054	600-1400	8-66	200-500	80	4.5-9	1245
420/18TU-SH	1200	2520-5400	700-1500	13-57	200-400	85	5-10	1370

Slurry Pump Structure Diagram
Brief Introduction to Slurry Pump Type Selection:
Referring to the performance curves of the pump the selected capacity range should be as follows:
Pump Type M, SH: 40-80% for higher density, strong abrasive slurry
                            40-80% for medium density, medium abrasive slurry
                            40-120% for lower density, lower abrasive slurry


Slurry Pump Photos


About Shijiazhuang LongTeng 
We Shijiazhuang Longteng is a factory of slurry pump and spare parts with our own casting workshop,with more than 20 years of casting experience. We have complete production lines for various pump types and can control product quality from the source,because we never use recycling material. All products must undergo 4 to 5 times  inspections from production to delivery, such as material inspection before and after casting, hardness inspection, several times dimension Detection, impeller balance inspection(Including static balance and dynamic balance), pressure inspection before the pump leaves our factory, etc. Multiple testing ensures that each product must be qualified before delivery.
In addition to product quality, we also attach great importance to service and believe that only good quality and service can ensure a happy and long-term cooperative relationship. As a real factory, we can provide you with one-stop service from production to after-sales, so that you have no worries during cooperating with us.

Our technical service
Provide users with important technical information for operation and maintenance. Combining with the network and remotely, provide technical and business training for equipment installation, commissioning, operation, and maintenance. When necessary, experienced engineering and technical personnel could be sent to provide on-site technical services in time . After receiving the user's complain of the quality problem , It is guaranteed to reply within 24 hours and provide a solution within 48 hours, and the service will not stop if the user is not satisfied with the solution.

Why Chose Us
We don't tie our clients into expensive service contracts.
We believe in working with our clients as and when they require our services.
We make it very clear what you do and do not need to spend money on and ensure that you get the maximum return out of your investment in your pumps.
We offer a 1 Year Warranty on our Slurry pumps which is unique in the industry.
We are committed to being the easiest company in the industry to deal with as well as the friendliest
When you work with us, you can count on personalized, one-on-one service every step of the way. We earn your trust by being responsive, intuitive and honest. We earn your respect by delivering on time and on budget. We built our reputation on exceptional customer service.


Our Product Process: 

Our Product Process:

    1.Mold Measurement Before Production      2.Modelling with Aluminum Mold & Resin Sand     3.Material Detection Before & After Casting

                                     4.Casting                                                 5.Heated Treatment                                         6.Dimension Measurement



FAQ

Q1: What is your product range?
A:Centrifugal pump includes slurry pump, gravel pump, clean water pump, sewage pump, chemical pump, self-priming pump and diesel engine pump.
Q2: What's your MOQ ?
A:Both for slurry pump or spare parts is 1.
Q3: How long is the lead time?
A:In general 3 working days for slurry pump, 7 working days for spare parts,or according to the order quantity.
Q4: Is OEM parts available ?
A:Yes,with our own Foundry,OEM service is our big advantage,just show your detailed drawing,different materials is available.
Q5: What information I need to offer for quotation?
A: Liquid:___ ; Pump Capacity___m3/h ; PH:_____ ; Pump Head: ___m ; Specific of gravity___ ; Voltage ___V ; Frequency ___Hz

Packing & Transport
Standard export plywood wooden box lined with plastic film and bubble film to better protect the product from any intact until arrival at the customer's warehouse.
No matter where you are located, we can get the products you need to your hands by land, ship and air