Abrasive Slurry Sump Pump Parts Mining Equipment Parts with Goog Quality and Factory Price

• Customization: Available
• Type: Standard and OEM Parts for Existed Pump Lines
• Cr Content: Min 27%
• Model NO.: LT-SP030
• OEM Service: Offered
• Color: Customized
• Materials: High Hardness Metal or Rubber,PU
• Pump Parts Engineering: up on Need
• Factory: Yes
• Delivery Time: Shorter
• Transport Package: Wooden Packing
• Specification: High Chrome Alloy, Rubber, PU etc
• Trademark: Longteng
• Origin: China
• HS Code: 8413190000
• Production Capacity: 3000tons/Year

Product Description

Pump Description

Slurry Pump Spare Parts

Longteng® is committed to improvement ofslurry pump spares continues with the introduction of the Hyperchrome alloy material. Slurry pump spares have direct connection with slurry, are very crucial to the service life of slurry pumps. The slurry pump spare parts include slurry pump impeller, slurry pump liners, slurry pump throatbush, slurry pump frame plate liner insert, slurry pump casing, slurry pump shaft, slurry pump shaft sleeves, slurry pump bearing assembly etc, They are very easily worn-out components because the slurry pump spares work under longtime impact of abrasive and corrosive slurries in the high speed. For the long service life of slurry pump spares, the material plays an important role here.

Slurry Pump Spares Details

Slurry pump Volute Liner is an important wear part of slurry pumps. It forms a slurry pump chamber with throat bush and frame plate liner insert where the slurry would flow through them. Slurry volute Liner is a curved funnel increasing in area to the discharge port. It is often used with slurry pump impeller. As the area of the cross-section increases, the volute reduces the speed of the liquids and increases the pressure of the liquids. The main purposes of a volute liner is to help balance the hydraulic pressure on the shaft of the slurry pump.
 

Slurry Pump impeller is one of the most important parts of centrifugal slurry pump. Depending on site application, slurry pump impeller selection can be crucial to pump performance. Slurry applications can be especially hard on the impeller of slurry pump because of their abrasive nature. In order for your process to operate efficiently and stand up to the test of time, you must choose the proper slurry pump impeller.LongTeng^® offers three different types of slurry pump impellers: open, closed, and semi-closed. Each has its own strengths and weaknesses, depending on the application. 

Slurry Pump Throat Bush links plate liner and forms a Pump chamber to work with impeller, as one of wetted parts for the slurry pump, Its wear-resistance is very important to pump worklife. LongTeng offers Cr27Mo high chrome alloy which is high abrasion resistance, and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal.

Slurry Pump Spares Code:

Code	1.5/1 SH	2/1.5 SH	3/2 SH	4/3 SH	6/4 SH	8/6 SH	10/8 SH	12/10 SH	14/12 SH	16/14 SH
003	B003M	B003M	C003M	C003M	D003M	E003M	FAM003M	ST003M	ST003M	TU003
004	B004M	B004M	C004M	C004M	D004M	E004M	F004M	S004M	S004M	T004M
005	B005M	B005M	C005M	CAM005M	DAM005M	EAM005M	FAM005M
011	B011	B011	C011	C011	D011	E011	F011			T008
013	B1013	B15013	C2013	D3013	E4013	F6013	G8013	F011	F011	T011
015	B015M	B015M	C015M	D015M	E4015M	F6015M	G8015M
017	B1017	B15017	C2017	D3017				G10013	G12013	H14013
018					E4018R	F6018		G10015M	G12015M	H14015M
024	B024	B024	C024	C024	D024	E024	F024
028	B028	B028	C028	D028	DAM028	EAM028		S024	S024	T024
029	B029	B029	C029	CAM029	DAM029	EAM029		S025	S025
029R	B029R	B029R	C029R	CAM029R	DAM029R	EAM029RM		SH028	SH028	TH028
032	B1032	B15032	C2032	CAM3032	DAM4032	EAM6032	G8032	G029	G029	H029
036	B1036	B15036	C2036	D3036	E4036R	F6036
041	B1041NA	B15041NA	C2041	D3041	E4041	F6041	G8041	G10032	G12032	H14032
044	B044	B044	C044	C044	D044	E044	G044
046	B046	B046	C046	C046	D046	E046	F046	G10041	G12041	H14041
052	B1052							G044	G044	H044
060	B1060	B15060	C2060	D3060	E4060		G8060
061	B061	B061	C061	C061	D061	E061	F061
062	B062	B062	C062	C062	D062	E062	FAM062	G10060	G12060	H14060
063	B063	B063	C063	C063	D063	E063	G063
064				D064	F064	F064		S062DM	S062DM	T062DM
067	B067	B067	C067	C067	D067	E067	G067	G063	G063	H063
073	B073M	B073M	C073M	CAM073M	DAM073M	EAM073M	FAM073M			TH064
075	B075	B075	C075	C075	D075	E075	FAM075	G067	G067	H067
076					DAM076JM			SH073M	SH073M	TH073
078	B078	B078JM	C078	CAM078	DAM078	EAM078	G078	SH075	SH075	TH075
081						F6081		SH076	SH076	TH076
083					E4083R	F6083	G8083	G078JM	G078	H078
090	B090	B090	C090	C090	D090
108	B108		C108		D108		F108	G10083	G12083	H14083
109	B109	B109	B109	C109	D109	E109	F109	G090
110	B1110NA	B15110NA	C2110NA	D3110	E4110	F6110	G8110
117	B117	B117	C117	CAM117	DAM117	EAM117	G117	G109		T109
118	B118	B118	C118	C118	D118	E118	G118	G10110	G12110	H14110
122	B122	B122	C122	D122	E122	F122	G122
124					E4124		G8124	G118	G118	H118
125	B1125	B15125	C2125	D3125				G122	G122	H122
127	B1127NA	B15127NA	C2127					G10124	G12124	H14124
132	B1132XL	B15132L	C2132XLP	D3132XLP	E4132XLP	F6132XLP	G8132XLP	G10132XLP	G12132XLP	H14132L
138	B138	B138	D138	D138	D138	D138		G138	G138	G138
147			C2147	D3147NA	E4147R	F6147R	FAM8147
217	B217	B217	C217					G10147	G12147	GAM14147
239							FAM239M	CSC210	CSC210
241					D241	E241		S239M	S239M	T239M
302						F6302				H14302
303						F303
304						F6304		G10304	G12304	H14304
315										T315

 

 

The Properties of The Rubber Material:
We have variety of natural rubber and elastomer, which can be used for pumping corrosive or acid slurry. But the rubber material is not suitable for slurry which contain sharp solids.
When the slurries contain fine particles, the rubber material features good performance of wear resistant.

Rubber Material:
 

Material	Material #	Applications
Natural Rubber	R08	R08 is low to medium hardness rubber used for impellers where slurry contains fine particles and erosive.
Natural Rubber(soft)	R26	R26 is soft natural rubber used for liners where slurry contains fine particle and more erosive.
Natural Rubber(soft)	R33	R33 is widely used for frame plate liners, cover plate liners and impellers. Max particle diameter is 10mm; impeller peripheral speed should be less than 25m/s; suitable for temperature not exceeding 75ºC.
Natural Rubber	R55	R55 is widely used for impellers, frame plate liners, cover plate liners and throat bushes. Max particle diameter can be 20mm, impeller peripheral speed should be less than 27.5m/s; suitable for temperature not exceeding 75ºC.
EPDM Rubber	S01	S01 is widely used for impellers, frame plate liners, cover plate liners and throat bushes. Maxparticle diameter can be 8mm; impeller peripheral speed should be less than 25m/s; suitable for temperature not exceeding 120ºC(continuous duty) or 140ºC(discontinuous duty).
Nitrile Rubber(NBR)	S12	S12 is widely used for frame plate liners, cover plate liners, throat bushes, lip seals, impellers and expellers. Maxparticle diameter is 7mm; impeller peripheral speed should be less than 27m/s; suitable for temperature not exceeding 95ºC.
Butyl Rubber	S21	S21 is widely used for impellers, frame plate liners, cover plate liners, expellers, volute seals and throat bushes,. Maxparticle diameter can be 7mm; impeller peripheral speed should be less than 30m/s; suitable for temperature not exceeding 100ºC.
Hypalon	S31	S31 can be used for impellers, frame plate liners, cover plate liners and throat bushes,. It is recommended to use for strong acid slurry with mild or moderate corrosion. Max particle diameter can be 10mm; impeller peripheral speed should be less than 30m/s; suitable for temperature not exceeding 110ºC.

Metal Material
 

Code	Material #	Hardness  HRC	Performance	Application
A05	KmTBCr26	≥56	Ranks second only to A07 in abrasion-resistant performance; fair corrosion-resistant performance.	High impact load abrasion condition; PH rate ranging from 5 to 12
A07	KmTBCr15Mo3	≥59	Best abrasion-resistant performance; corrosion-resistant performance is inferior to A05	High impact load abrasion condition
A33		≥35	Abrasion-resistant performance is close to A03; fair corrosion-resistant performance	Oxide slurry with PH rate no less than 1, like phosphor-gypsum in phosphate fertilizer plant, nitric acid, sulph-oacid and phosphoric acid, etc.
A49		≥43	Fair abrasion-resistant performance, close to A03; fair corrosion-resistant performance in media with lower PH rate.	Corrosion conditions with low PH rate, especially for flue gas and FGD devices for media of PH≥4; general suitable for lower acid condition.
A12		≥62	Higher abrasion-resistant performance than A05; fair corrosion-resistant performance; suitable for media with PH rate is 6-16, where A05 is not suitable.	High abrasive slurry with fine particles.
A61		63-68	Optimized abrasion-resistant performance than A12	High abrasive slurry with fine particles.

 

Materials for Wet End Parts:

High chrome alloy :A05, A07, A49, etc.

Natural rubber:R08, R26, R33, R55, etc.
Polyurethane
Ceramic

Other material as per requests, like stainless steel, duplex stainless steel, Nickle alloy, Alloy 20, etc.

About Shijiazhuang LongTeng 
We Shijiazhuang Longteng is a factory of slurry pump and spare parts with our own casting workshop,with more than 20 years of casting experience. We have complete production lines for various pump types and can control product quality from the source,because we never use recycling material. All products must undergo 4 to 5 times inspections from production to delivery, such as material inspection before and after casting, hardness inspection, several times dimension Detection, impeller balance inspection(Including static balance and dynamic balance), pressure inspection before the pump leaves our factory, etc. Multiple testing ensures that each product must be qualified before delivery.
In addition to product quality, we also attach great importance to service and believe that only good quality and service can ensure a happy and long-term cooperative relationship. As a real factory, we can provide you with one-stop service from production to after-sales, so that you have no worries during cooperating with us.

Our technical service
Provide users with important technical information for operation and maintenance. Combining with the network and remotely, provide technical and business training for equipment installation, commissioning, operation, and maintenance. When necessary, experienced engineering and technical personnel could be sent to provide on-site technical services in time . After receiving the user's complain of the quality problem. It is guaranteed to reply within 24 hours and provide a solution within 48 hours, and the service will not stop if the user is not satisfied with the solution.
 

Our Professional Attentive Service.

1. Perfect Quality Control-- We own professional quality management and process inspection team

2. Fast High Quality Service--In the process of service,the demands of all customers can be solved quickly and effectively.

3. Supply Support Capacity--We ensures the products with good quality,sufficiently quantity and diversification.

4. Excellent Cost Performance--Provide the most excellent products,the most favorable price and the most perfect service to all customers.

We are 365days x 24 hours reday for you!

Line of production:
We Shijiazhuang Longteng is a factory of slurry pump and spare parts with our own casting workshop,with more than 20 years of casting experience. We have complete production lines for various pump types and can control product quality from the source,because we never use recycling material. All products must undergo 4 to 5 times  inspections from production to delivery, such as material inspection before and after casting, hardness inspection, several times dimension Detection, impeller balance inspection(Including static balance and dynamic balance), pressure inspection before the pump leaves our factory, etc. Multiple testing ensures that each product must be qualified before delivery.


Our Stock products:
We have sufficient inventory of products throughout the year to ensure that we can issue products in the shortest time, to ensure that our customers in any urgent need of product replenishment can receive products quickly, and better serve the end customers!

 

Why Chose Us?

We don't tie our clients into expensive service contracts.
We believe in working with our clients as and when they require our services.
We make it very clear what you do and do not need to spend money on and ensure that you get the maximum return out of your investment in your pumps.
We offer a 1 Year Warranty on our Slurry pumps which is unique in the industry.
We are committed to being the easiest company in the industry to deal with as well as the friendliest
When you work with us, you can count on personalized, one-on-one service every step of the way. We earn your trust by being responsive, intuitive and honest. We earn your respect by delivering on time and on budget. We built our reputation on exceptional customer service.

 

 

Packaging & Shipping

Standard export plywood wooden box lined with plastic film and bubble film to better protect the product from any intact until arrival at the customer's warehouse.No matter where you are located, we can get the products you need to your hands by land, ship and air

Standard  and strong Wooden Case for Exporting,in order to ensure the goods can reach you intactly

 

Certificates:

 

FAQ

1. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

2.what can you buy from us?
Horizontal slurry pump, Vertical slurry pump(Submerged), Gravel/Sand pump, Dredger pump, ZGB Series Slurry pump, ZJ Series Slurrypump, Froth pump and spare parts or OEM.

3.Are you the manufacturer or trading company?
We are professional manufacturer for slurry pumps and spare parts,experence more than 20 years in Shijiazhuang City.

4.What is your delivery time?
There are lots of inventory in our factory for the common pump parts.

 

In order to ensure the fastest feedback and correct quotation for you, we need to know the following information:

1. Inlet diameter

2. Outlet diameter

3. Working conditions

4. Head(m)
5. Flow(m3/h)

5. Particle size & content

6. PH
7. SG