12 Inch Sand Gravel Pump 20+ Years Experience

• Customization: Available
• After-sales Service: Providing 24/7 Support
• Warranty: 12 Months
• Model NO.: LMG-12
• Max.Head: 100 M
• Max.Capacity: 1025 M3/Hr
• Driving Type: Motor
• Impeller Number: Single-Stage Pump
• Working Pressure: Low Pressure Pump
• Influent Type of Impeller: Single Suction Pump
• Position of Pump Shaft: Horizontal Pump
• Pump Casing Combined: Horizontal Split Pumps
• Mounting Height: Suction Centrifugal
• Impeller: Closed
• Usage: Slurry Pump
• Factory: Yes
• OEM: Yes
• Lead Time: 3 - 5 Days
• Application: Pumping Hydrocyclone Feed and Sand, as Well as Reg
• Transport Package: Plywood Case
• Specification: 1-6 inches
• Trademark: LONGTENG PUMP
• Origin: China
• HS Code: 84137099
• Production Capacity: 2000 Set/Year

Product Description

Product Description

 

GRAVEL PUMP

Each pump, according to size, will allow for larger particle passing capability; it is much higher than for all our other ranges of pumps.

Wet End:

• Impeller - Constant vane thickness allows for linear wear and enduring efficiency.

• Liner - Lightweight casing fasteners for quick-and-easy maintenance.

• Throat Bush - Adjustable suction liner assembly.

• Back Liner - Matching impeller and inlet flow lines, reduce inlet losses and wear, with increased efficiency.
 

The impeller is the main rotating component which normally has vanes to impart the centrifugal force to the liquid.

 

Most slurry pump casing are "slower" than their water pump cousins, primarily to reduce wear though lower internal velocities.

 

Wear resistant cast alloys are used for slurry pump liners and impellers where conditions are not suited to rubber, such as with coarse or sharp edged particles, or on duties having high impeller peripheral velocities or high operating temperatures.

 

Front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Hard metal and molded elastomer impellers are completely interchangeable. Cast in impeller threads require no inserts or nuts.

High efficiency and high head designs are also available.

 

Product Parameters

Type	Max. power, kW	Flow, m3/hour	Head, m	Eff, %		Impeller diameter, mm
6/4 D-G	60	36-250	7-56	50		378
8/6 E-G	120	180-540	12-52	60		378
10/8 F-G	260	180-820	12-56	60		533
12/10 G-G	600	360-1200	12-60	65		667
14/12 T-G	1200	700-2700	8-70	65		864

Detailed Photos

 

 

Packaging & Shipping