High Chrome Alloy Abrasion Resistance Gravel Dredging River Marine Sand Pumps for Sand Desilting Mining
LongTeng G, GH series gravel pump are horizontal, single pump shell structure of centrifugal pump, GH for high lift gravel pump.
G. GH series gravel pump adopts a single pump shell structure connected with a cassette, with a wide overflow channel.
The overflow parts are made of hard nickel, high chromium and other wear resistant materials. The discharge direction of the pump can be at any position of 360 °, which has the advantages of convenient installation and use, good cavitation performance, abrasion resistance and so on.
This series of pumps are mainly used for the continuous transportation of strong abrasive materials whose particles are too large to be transported by general slurry pumps, such as dredger excavation Mud, large particle sand mining, river dredging, transportation of mining and metal smelting slag, etc.
1.Horizontal, centrifugal, one stage, centrifugal gravel and slurry pump.
2.Made up of pump,bearing assembly,seal assembly,bracket and so on.
3.Wear resistant wet parts which is made of 27% High Chrome hard metal .
4.Long bearing life: The bearing assembly with large diameter shaft and short overhang.
5.Mechanical seal, expeller seal and packing seal
6.Pump discharge direction in any of 360 degree.easy installationWide passage , good performance of NPSH, anti-wearing and anti-corrosion, high efficiency
7. The special shape of the impeller vanes and casing combine with side sealing vanes to reduce recirculation down the front of the impeller and exclude abrasive solids from between the impeller and casing.
8. Drived by:V belt drive, gear reducer drive, fluid coupling drive, and frequency conversion drive devices.
9.Drvien type:DC,CR,CV, CLZ,ZV, ZVZ..
Slurry Pump Parameter Table
| Pump Model |
Allowable
Max. Power
(kw) |
Clear Water Performance |
|
| |
|
Capacity Q |
Head
H (m) |
Speed
n(r/min) |
Max.Eff.
(%) |
NPSH
(m) |
Impeller. Dia. (mm) |
| |
|
m3/h |
l/s |
|
|
|
|
|
| 6/4D-G |
60 |
36-250 |
10-70 |
5-52 |
600-1400 |
58 |
2.5-3.5 |
378 |
| 8/6E-G |
120 |
126-576 |
35-160 |
6-45 |
800-1400 |
60 |
3-4.5 |
378 |
| 10/8S-GH |
560 |
216-936 |
60-260 |
8-52 |
500-1000 |
65 |
3-7.5 |
533 |
| 10/8S-G |
560 |
180-1440 |
50-400 |
24-30 |
500-950 |
72 |
2.5-5 |
711 |
| 12/10G-G |
600 |
360-1440 |
100-400 |
10-60 |
400-850 |
65 |
1.5-4.5 |
667 |
| 12/10G-GH |
1200 |
288-2808 |
80-780 |
16-80 |
350-700 |
73 |
2.0-10.0 |
950 |
| 14/12G-G |
1200 |
576-3024 |
160-840 |
8-70 |
300-700 |
68 |
2.0-8.0 |
864 |
| 16/14G-G |
600 |
720-3600 |
200-1000 |
18-44 |
300-500 |
70 |
3.0-9.0 |
1016 |
| 16/14TU-G |
1200 |
324-3600 |
90-1000 |
26-70 |
300-500 |
72 |
3.0-6.0 |
1270 |
| 18/16TU-G |
1200 |
720-4320 |
200-1200 |
12-48 |
250-500 |
72 |
3.0-6.0 |
1067 |
Slurry Pump Structure Explosive View:
Pump Driven Type
About Shijiazhuang LongTeng
We Shijiazhuang Longteng is a factory of slurry pump and spare parts with our own casting workshop,with more than 20 years of casting experience. We have complete production lines for various pump types and can control product quality from the source,because we never use recycling material. All products must undergo 4 to 5 times inspections from production to delivery, such as material inspection before and after casting, hardness inspection, several times dimension Detection, impeller balance inspection(Including static balance and dynamic balance), pressure inspection before the pump leaves our factory, etc. Multiple testing ensures that each product must be qualified before delivery.
In addition to product quality, we also attach great importance to service and believe that only good quality and service can ensure a happy and long-term cooperative relationship. As a real factory, we can provide you with one-stop service from production to after-sales, so that you have no worries during cooperating with us.
Our technical service
Provide users with important technical information for operation and maintenance. Combining with the network and remotely, provide technical and business training for equipment installation, commissioning, operation, and maintenance. When necessary, experienced engineering and technical personnel could be sent to provide on-site technical services in time . After receiving the user's complain of the quality problem. It is guaranteed to reply within 24 hours and provide a solution within 48 hours, and the service will not stop if the user is not satisfied with the solution.
Line of production:
We Shijiazhuang Longteng is a factory of slurry pump and spare parts with our own casting workshop,with more than 20 years of casting experience. We have complete production lines for various pump types and can control product quality from the source,because we never use recycling material. All products must undergo 4 to 5 times inspections from production to delivery, such as material inspection before and after casting, hardness inspection, several times dimension Detection, impeller balance inspection(Including static balance and dynamic balance), pressure inspection before the pump leaves our factory, etc. Multiple testing ensures that each product must be qualified before delivery.
Our Stock products:
We have sufficient inventory of products throughout the year to ensure that we can issue products in the shortest time, to ensure that our customers in any urgent need of product replenishment can receive products quickly, and better serve the end customers!
When you work with us, you can count on personalized, one-on-one service every step of the way. We earn your trust by being responsive, intuitive and honest. We earn your respect by delivering on time and on budget. We built our reputation on exceptional customer service.
Customer Projects:
Standard export plywood wooden box lined with plastic film and bubble film to better protect the product from any intact until arrival at the customer's warehouse.No matter where you are located, we can get the products you need to your hands by land, ship and air
Certificates:
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}