Hebei Heavy Duty Industrial Mining Mineral Centrifugal-Pump
LongTeng Slurry pumps are centrifugal pumps, they are designed for pumping highly abrasive and high density slurry.
These slurries are thick, viscous fluids that contain particles, which are hard to pump with traditional process chemical or water pumps.Under this situation, our heavy-duty slurry pump is used to do the work.
LongTeng Slurry Pumps are widely used in various industrial sites,such as mining,mineral,metallurgy processing, dredging,
de-watering, water treatment, coal washing, mill, cyclone feed, tailing, power, building material etc.
Mud pump, sand pump, dredge pump, sludge pump, impurity pump and desilting pump are all belong to category of slurry pump.
SHseries pumps are called different names for different working duties: Mineral processing pump, Mill discharge slurry Pump,
Booster pump, Feeding pump, Tailing pump,Transfer pump, Thickner Underflow Pump, Dewatering screen pump, Pressure pump...
1.Replaceable wear-resistant metal or rubber liners and impellers, long service life time.
2. Easily maintenance,casing and each wear parts can be removed completely when maintaining.
3. Bearing assembly use grease lubrication.
4. Seal types: Packing seal, Expeller seal and Mechanical seal.
5. Discharge direction can be installed at intervals of 45 degrees as request and oriented to any eight positions to suit applications.
6. Drived by:V belt drive, gear reducer drive, fluid coupling drive, and frequency conversion drive devices.
7.Drvien type:DC,CR,CV, CLZ,ZV, ZVZ...
8. Application Widely, better NPSH and high efficiency.SH series pump can be installed in multistage to meet more requirements.
Pump
Model |
Allowable
Max. Power(KW) |
Clear Water Performance |
|
| |
|
Capacity Q |
Head
H(m) |
Speed
n(r/min) |
Max.Eff.
η% |
NPSH
(m) |
Impeller
Dia. |
| |
|
m3/h |
l/s |
|
|
|
|
|
| 1.5/1 B-SH |
15 |
12.6-28.8 |
3.5-8 |
6-68 |
1200-3800 |
40 |
2-4 |
152 |
| 1.5/1B-SHR |
15 |
10.8-25.2 |
3-7 |
7-52 |
1400-3400 |
35 |
2-4 |
152 |
| 1.5/1C-HH |
30 |
16.2-34.2 |
4.5-9.5 |
25-92 |
1400-2200 |
20 |
2-5.5 |
330 |
| 2/1.5-SH |
15 |
32.4-72 |
9-20 |
6-58 |
1200-3200 |
45 |
3.5-8 |
184 |
| 2/1.5-SHR |
15 |
25.2-54 |
7-15 |
5.5-41 |
1000-2600 |
50 |
2.5-5 |
178 |
| 3/2C-SH |
30 |
39.6-86.4 |
11-24 |
12-64 |
1300-2700 |
55 |
4-6 |
214 |
| 3/2C-SHR |
30 |
36-75.6 |
10-21 |
13-39 |
1300-2100 |
55 |
2-4 |
213 |
| 3/2D-HH |
60 |
68.4-136.8 |
19-38 |
25-87 |
850-1400 |
47 |
3-7.5 |
457 |
| 4/3C-SH |
30 |
86.4-198 |
24-55 |
9-52 |
1000-2200 |
71 |
4-6 |
245 |
| 4/3D-SH |
60 |
86.4-198 |
24-55 |
9-52 |
1000-2200 |
71 |
4-6 |
245 |
| 4/3C-SHR |
30 |
79.2-180 |
22-50 |
5-34.5 |
800-1800 |
59 |
3-5 |
245 |
| 4/3D-SHR |
60 |
79.2-180 |
22-50 |
5-34.5 |
800-1800 |
59 |
3-5 |
245 |
| 6/4D-SH |
60 |
162-360 |
45-100 |
12-56 |
800-1550 |
65 |
5-8 |
365 |
| 6/4E-SH |
120 |
162-360 |
45-100 |
12-56 |
800-1550 |
65 |
5-8 |
365 |
| 6/4D-SHR |
60 |
144-324 |
40-90 |
12-45 |
800-1350 |
65 |
3-5 |
365 |
| 6/4E-SHR |
120 |
144-324 |
40-90 |
12-45 |
800-1350 |
65 |
3-5 |
365 |
| 6/4F-SHH |
260 |
324-720 |
90-200 |
30-118 |
600-1000 |
64 |
3-8 |
711 |
| 8/6E-SH |
120 |
360-828 |
100-230 |
10-61 |
500-1140 |
72 |
2-9 |
510 |
| 8/6S-SH |
300 |
360-828 |
100-230 |
10-61 |
500-1140 |
72 |
2-9 |
510 |
| 8/6E-SHR |
120 |
324-720 |
90-200 |
7-49 |
400-1000 |
65 |
5-10 |
510 |
| 8/6R-SH |
300 |
324-720 |
90-200 |
7-49 |
400-1000 |
65 |
5-10 |
510 |
| 8/6S-HH |
560 |
468-1008 |
130-280 |
20-94 |
500-1000 |
65 |
4-12 |
711 |
| 10/8ST-SH |
560 |
612-1368 |
170-380 |
11-61 |
400-850 |
71 |
4-10 |
686 |
| 10/8ST-SHR |
560 |
540-1188 |
200-450 |
7-45 |
300-650 |
80 |
2.5-7.5 |
686 |
| 10/8E-M |
120 |
540-1440 |
150-400 |
14-60 |
600-1000 |
73 |
4-10 |
549 |
| 12/10HS-ST |
560 |
936-1980 |
260-550 |
7-68 |
300-800 |
82 |
6 |
762 |
| 12/10 ST-SH |
560 |
720-1620 |
320-700 |
13-14 |
300-500 |
79 |
3-8 |
762 |
| 14/12ST-SH |
560 |
1260-2772 |
350-770 |
13-63 |
300-600 |
77 |
3-10 |
965 |
| 14/12ST-SHR |
560 |
1152-2520 |
380-850 |
11-63 |
250-550 |
79 |
4-10 |
965 |
| 16/14ST-SH |
1200 |
1368-3060 |
380-850 |
11-63 |
250-550 |
79 |
4-10 |
1067 |
| 18/16TU-SH |
1200 |
2160-5054 |
600-1400 |
8-66 |
200-500 |
80 |
4.5-9 |
1245 |
| 420/18TU-SH |
1200 |
2520-5400 |
700-1500 |
13-57 |
200-400 |
85 |
5-10 |
1370 |
Slurry Pump Structure Diagram
Brief Introduction to Slurry Pump Type Selection:
Referring to the performance curves of the pump the selected capacity range should be as follows:
Pump Type M, SH: 40-80% for higher density, strong abrasive slurry
40-80% for medium density, medium abrasive slurry
40-120% for lower density, lower abrasive slurry
About Shijiazhuang LongTeng
We Shijiazhuang Longteng is a factory of slurry pump and spare parts with our own casting workshop,with more than 20 years of casting experience. We have complete production lines for various pump types and can control product quality from the source,because we never use recycling material. All products must undergo 4 to 5 times inspections from production to delivery, such as material inspection before and after casting, hardness inspection, several times dimension Detection, impeller balance inspection(Including static balance and dynamic balance), pressure inspection before the pump leaves our factory, etc. Multiple testing ensures that each product must be qualified before delivery.
In addition to product quality, we also attach great importance to service and believe that only good quality and service can ensure a happy and long-term cooperative relationship. As a real factory, we can provide you with one-stop service from production to after-sales, so that you have no worries during cooperating with us.
Our technical service
Provide users with important technical information for operation and maintenance. Combining with the network and remotely, provide technical and business training for equipment installation, commissioning, operation, and maintenance. When necessary, experienced engineering and technical personnel could be sent to provide on-site technical services in time . After receiving the user's complain of the quality problem , It is guaranteed to reply within 24 hours and provide a solution within 48 hours, and the service will not stop if the user is not satisfied with the solution.
When you work with us, you can count on personalized, one-on-one service every step of the way. We earn your trust by being responsive, intuitive and honest. We earn your respect by delivering on time and on budget. We built our reputation on exceptional customer service.
Q1: What is your product range?
A:Centrifugal pump includes slurry pump, gravel pump, clean water pump, sewage pump, chemical pump, self-priming pump and diesel engine pump.
Q2: What's your MOQ ?
A:Both for slurry pump or spare parts is 1.
Q3: How long is the lead time?
A:In general 3 working days for slurry pump, 7 working days for spare parts,or according to the order quantity.
Q4: Is OEM parts available ?
A:Yes,with our own Foundry,OEM service is our big advantage,just show your detailed drawing,different materials is available.
Q5: What information I need to offer for quotation?
A: Liquid:___ ; Pump Capacity___m3/h ; PH:_____ ; Pump Head: ___m ; Specific of gravity___ ; Voltage ___V ; Frequency ___Hz
Packing & Transport
Standard export plywood wooden box lined with plastic film and bubble film to better protect the product from any intact until arrival at the customer's warehouse.
No matter where you are located, we can get the products you need to your hands by land, ship and air
Audited Supplier 
){kind=link}